loading

Professional O-Ring and Oil Seal Manufacturer, Sealing Solution Supplier Since 2008.

What to do when the seal ring breaks?

What to do when the seal ring breaks?

The treatment method after the sealing ring is broken mainly depends on the degree of fracture and the type of sealing ring. Here are some common ways to deal with it:

 

1. Temporary repair methods

Cleaning and drying:

Before any repair, first make sure that the broken area is clean and dry in order to enhance the adhesion of the repair material.

Use sealant:

For small cracks or wear, special sealant can be used to repair. When applying sealant, be sure to cover the broken surface evenly and follow the sealant instructions.

Heating recovery:

If the seal is only slightly deformed or hardened, try soaking it in hot water or heating it with a hair dryer for a few minutes to soften it and restore it. However, pay attention to the heating temperature and time to avoid further damage to the sealing ring caused by excessive heating.

To use a tire patch:

The patch is not only suitable for tires, but can also be used to repair broken seals on equipment such as washing machines. Cut the patch to a suitable shape and then paste it on the broken part.

Second, replace the sealing ring

Determine the model and specification:

If the sealing ring is seriously broken or cannot be repaired, a new sealing ring needs to be replaced. Before replacement, it is necessary to accurately determine the model and specification of the sealing ring to ensure that the new sealing ring can be fully adapted.

Remove the old seal ring:

Remove old seals with appropriate tools. Caution should be exercised during removal to avoid damaging surrounding components.

Install new seals:

Install the new seal in place and ensure that it is installed correctly and tightly. A lubricant (such as petroleum jelly or cooking oil) can be used during installation to reduce friction and help the seal fit smoothly into place.

Iii. Preventive measures

Regular inspection and maintenance:

Regular inspection and maintenance of the seal ring, timely detection and treatment of potential problems.

Use less harsh cleaners:

When cleaning the seal ring, use a small irritant cleaner to avoid corrosion or damage to the seal ring.

Develop good habits:

When using the equipment, follow the instructions to avoid damage to the seal ring caused by improper use.

The treatment methods after the sealing ring is broken include temporary repair method and replacement of the sealing ring. When selecting the specific treatment method, it is necessary to judge and make decisions according to the degree, type and actual situation of the sealing ring fracture. At the same time, taking preventive measures can effectively extend the service life of the sealing ring and reduce the possibility of failure.

prev
The difference between Y seal and O seal
How to choose a rubber gasket?
next
recommended for you
no data
Get in touch with us
Contact Us
Customer service
detect